Part Description: 2007 Chevrolet Equinox Blower Motor
More Info
Vehicle Fitment
2007 Chevrolet Equinox | L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Part Description: 2007 Chevrolet Equinox Hvac Blower Motor With Wheel
More Info
Vehicle Fitment
2007 Chevrolet Equinox | All Trims | All Engines
$50.88
FAQ for Blower Motor Repair
Q: How to install the Blower Motor?
A:
You may need to install the blower motor to the HVAC module, install the blower motor screws to the HVAC module and tighten the screws to 1.5 N.m (13 lb in), then connect the electrical connector to the blower motor and install the right sound insulator panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Blower Motor?
A:
You will need to remove the right sound insulator panel, disconnect the electrical connector from the blower motor, remove the blower motor screws from the HVAC module, then remove the blower motor from the HVAC module.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Heater Core?
A:
You may need to install the Heater Core, the heater core cover and the heater core cover screws to the HVAC module, then tighten the screw to 1.5 N.m (13 lb in) and install the HVAC module to the vehicle.
Q: What's the recommended torque for the CRFM bracket bolts installed on the radiator support?
A:
The recommended torque is 20 N.m (15 lb-ft).
Q: What's the clearance between the compressor clutch and the compressor pulley?
A:
You can ensure the clearance is 0.3 mm to 0.6 mm (0.012 into 0.024 in).