2007 Chevrolet Equinox Battery Cables

You will need to disconnect the battery negative cable, then raise and suitably support the vehicle. Then you should remove the Starter motor solenoid positive terminal nut and electrical wires, the starter motor solenoid S terminal nut and electrical wire, the torque converter cover bolt, the torque converter cover, the starter motor bolts, and the starter motor.

You may need to install the generator to the generator bracket, install the generator bolts and tighten the generator bolts to 50 N.m (37 lb-ft), next install the drive belt, the generator electrical connector, the generator B+ lead, and the generator B+ terminal nut, then tighten the generator B+ terminal nut to 20 N.m (15 lb-ft), finally install the battery ground (negative) cable to the battery.

You may need to position the battery tray support bracket, install the battery tray support bracket bolts and tighten the bolts to 25 N.m (18 lb-ft), next install the battery tray support bracket bolt and tighten the bolt to 25 N.m (18 lb-ft), finally install the battery box.