Part Description: 2007 Chevrolet Corvette Valve Springs
More Info
Vehicle Fitment
2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$41.59MSRP: $66.04
You Save: $24.45 (38%)
FAQ for Valve Stem Oil Seal Repair
Q: What should be noticed while installing the valve stem oil seal?
A:
The valve stem oil seal alignment and position on the valve guide are critical. An improperly installed valve stem oil seal may lead to excessive oil consumption and increased vehicle emissions.
By Bob
GM Specialist
01/11/2022
Q: What kind of tools will be required in the replacement of the Valve Stem Oil Seal and Valve Spring?
A:
The tools required include J 22794 Spark Plug Port Adapter and J 38606 Valve Spring Compressor (Head-on).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed while removing the Valve Rocker Arm and Push Rod?
A:
Place the valve rocker arms, valve Pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.
Q: What should be noticed when installing the Valve Lifter?
A:
When using the Valve Lifters again, you shall install the lifters to their original locations. And if camshaft replacement is required, the valve lifters must also be replaced.
Q: What is the installation procedure for the Valve Stem Oil Seal and Valve Spring?
A:
The procedure is to install the valve stem oil seal, the Valve Spring and cap, the valve rocker arm wear pads, the spark plug, and the valve rocker arms.