Part Description: 2007 Chevrolet Corvette Cover Asm-Valve Rocker Arm
More Info
Vehicle Fitment
2007 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
FAQ for Valve Cover Repair
Q: What is the removal procedure for the Left Valve Rocker Arm Cover?
A:
The procedure is to remove the left engine sight cover, the ignition coil assembly, the valve rocker cover, and the gasket.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Right Valve Rocker Arm Cover?
A:
The proper way is to remove the engine sight cover, the crankcase ventilation hoses/pipes, the ignition coil assembly, the valve rocker arm cover, and the oil cap and seal.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the Left Valve Rocker Arm Cover?
A:
The procedure is to install a new rocker cover gasket, the valve rocker arm cover, the ignition coil assembly, and the left engine sight cover.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the Right Valve Rocker Arm Cover?
A:
The procedure is to install a new gasket, a new oil cap and seal, the valve rocker arm cover, the oil fill tube, the ignition coil assembly, the crankcase ventilation hoses/pipes, and the engine sight cover.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed while removing the Valve Rocker Arm and Push Rod?
A:
Place the valve rocker arms, valve Pushrods, and pivot support, in a rack so that they can be installed in the same location from which they were removed.
Q: What should be noticed when installing the Valve Lifter?
A:
When using the Valve Lifters again, you shall install the lifters to their original locations. And if camshaft replacement is required, the valve lifters must also be replaced.
Q: What is the installation procedure for the Valve Stem Oil Seal and Valve Spring?
A:
The procedure is to install the valve stem oil seal, the Valve Spring and cap, the valve rocker arm wear pads, the spark plug, and the valve rocker arms.