< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Corvette
< Back to View All
Oil Filters, Pans, Pumps & Related Parts
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Corvette Oil Pan
PartNumber: 24239529
Product Specifications- Other Names: Oil Pan, Transmission Pan
- Item Dimensions: 6.4 x 20.0 x 12.6 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Oil Pan
Vehicle Fitment- 2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$31.41 MSRP:$50.11You Save: $18.70 (38%)
OEM (Genuine) 2007 Chevrolet Corvette Oil Pan
PartNumber: 12626225
Product Specifications- Notes: 7.0 Liter; Corvette; 7.0l
- Item Dimensions: 26.6 x 12.9 x 9.1 inches
- Item Weight: 14.90 Pounds
- Replaced by: 12664619
- Part Description: 2007 Chevrolet Corvette Oil Pan
Vehicle Fitment- 2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$517.58 MSRP:$821.42You Save: $303.84 (37%)
OEM (Genuine) 2007 Chevrolet Corvette Oil Pan
PartNumber: 12624617
Product Specifications- Notes: W/O Supercharged; Corvette; 6.0l
- Other Names: Oil Pan
- Item Dimensions: 26.0 x 17.1 x 10.1 inches
- Item Weight: 14.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12598186
- Part Description: 2007 Chevrolet Corvette Oil Pan
Vehicle Fitment- 2007 Chevrolet Corvette | Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
Spectra Premium® New Design Engine Oil Pan Without Gaskets for 2007 Chevrolet Corvette
PartNumber: GMP95AProduct Specifications- Baffled: No
- Dipstick Port: Yes
- Drain Plug Thread Size: M12X1.75
- Item Grade: OEM Standard
- Kicked Out: No
- Material: Aluminum Casting
- Oil Pan Capacity (qt): 6.0
- Oil Pan Depth: 4.31
- Sump Location: Front
- Sump Style: Wet
- UPC: 671607016345
- Part Description: 2007 Chevrolet Corvette New Design Engine Oil Pan Without Gaskets
Vehicle Fitment- 2007 Chevrolet Corvette | Base | 8 Cyl 6.0L
FAQ for Oil Pan Repair
Q: What should be noted when installing the Oil Pan?
A:
It is important that the rear of the block and the rear of the oil pan are flush, or even. The rear of the oil pan must never protrude beyond the engine block and transmission housing plane. And do not use the oil pan gasket again.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before disconnecting the PCV tubes from the oil tank?
A:
You shall mark the port locations to the proper tubes or they can be installed incorrectly.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while removing the Oil Pan?
A:
It may be necessary to rotate the oil pan to remove it to gain enough clearance to clear the oil pump to pick up the tube.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while removing the PCV tubes from the oil tank?
A:
Anytime the oil tank inlet and outlet hoses are serviced, the oil seals must be replaced.
By Bob
GM Specialist
01/11/2022