2007 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
FAQ for Drive Belt Repair
Q: What is the proper way to install the Accessory Drive Belt?
A:
You shall install the accessory drive belt and the air intake duct if necessary, and inspect the accessory drive belt for correct alignment.
By Bob
GM Specialist
29/10/2022
Q: What is the proper way to remove the Accessory Drive Belt?
A:
You shall remove the air intake duct, the accessory drive belt, and the breaker bar and socket.
By Bob
GM Specialist
29/10/2022
Q: What is the proper way to install the Air Conditioning Drive Belt?
A:
The proper way is to install the A/C belt around the crankshaft balancer, and then install the accessory drive belt.
By Bob
GM Specialist
29/10/2022
Q: What is the proper way to remove the Air Conditioning Drive Belt?
A:
The proper way is to remove the accessory drive belt, the A/C belt from the pulleys, and the wrench and/or the socket from the A/C belt tensioner.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Drive Belt Idler Pulley?
A:
The proper way is to install the drive belt Idler Pulley and the accessory drive belt.
Q: What should be noted when installing the Timing Chain and Sprockets?
A:
You shall properly locate the camshaft sprocket onto the locating pin of the camshaft. The sprocket teeth and Timing Chain must mesh. the camshaft and the crankshaft sprocket alignment marks must be aligned properly.
Q: What is the installation procedure for the Accessory Drive Belt Tensioner?
A:
The procedure is to install the accessory drive Belt Tensioner and the accessory drive belt.