< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Corvette
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
PartNumber: 24238614
Product Specifications- Notes: 3.42 Ratio, Z06; Corvette; Manual Trans; 7.0l; 3.42 Ratio; 2nd Design
- Other Names: Carrier, Carrier Assembly
- Item Dimensions: 19.3 x 17.6 x 11.9 inches
- Item Weight: 78.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24235248
- Part Description: 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Carrier Assembly (2.56 Ratio)
PartNumber: 24235244Product Specifications- Notes: 2.56 Ratio; Corvette; Auto Trans; 2.56 Ratio; W/O Axle Cooling Sys.
- Other Names: Carrier, Carrier Assembly
- Item Dimensions: 18.8 x 20.4 x 12.6 inches
- Item Weight: 83.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Carrier Assembly (2.56 Ratio)
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Carrier Assembly (2.56 Ratio)
PartNumber: 24235243
Product Specifications- Notes: Corvette; Auto Trans; 2.56 Ratio; W/Axle Cooling Sys.
- Other Names: Carrier
- Item Dimensions: 18.4 x 19.8 x 12.6 inches
- Item Weight: 77.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Carrier Assembly (2.56 Ratio)
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
PartNumber: 24235246Product Specifications- Notes: Corvette; Manual Trans; 6.0l; 3.42 Ratio; W/Axle Cooling Sys
- Other Names: Carrier
- Item Dimensions: 18.4 x 19.4 x 12.7 inches
- Item Weight: 81.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
Vehicle Fitment- 2007 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
PartNumber: 24235247Product Specifications- Notes: 3.42 Ratio, Base
- Other Names: Carrier, Carrier Assembly
- Item Dimensions: 18.6 x 20.4 x 12.7 inches
- Item Weight: 84.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Carrier Assembly (3.42 Ratio)
Vehicle Fitment- 2007 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Assembly
PartNumber: 19132922Product Specifications- Notes: Corvette; Manual Trans; 7.0l
- Other Names: Differential
- Item Dimensions: 16.8 x 9.5 x 9.7 inches
- Item Weight: 12.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | 427 Limited Edition Z06, Z06 | 8 Cyl 7.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Assembly
PartNumber: 19132818Product Specifications- Notes: Corvette; Auto Trans; 2.56 Ratio
- Other Names: Differential
- Item Dimensions: 9.4 x 8.6 x 8.7 inches
- Item Weight: 22.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2007 Chevrolet Corvette Differential Assembly
PartNumber: 19132819Product Specifications- Notes: Corvette; Manual Trans; 6.0l
- Other Names: Differential
- Item Dimensions: 15.9 x 14.7 x 10.0 inches
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Corvette Differential Assembly
Vehicle Fitment- 2007 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
FAQ for Differential Repair
Q: What should be noticed while removing the Differential Cooler Pump?
A:
You should note the location of the cover rear bolt/stud for assembly and the alignment of the out shaft of the differential and the input shaft for the pump.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Differential Cooler Adapter Nut?
A:
The procedure is to remove the quick connect fitting retaining ring, the differential cooler inlet pipe, and the differential cooler adaptor nut.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before installing the Differential Cooler Hose/Pipe Quick-connect Fitting?
A:
You shall inspect the DOC pipe fitting and retaining clip for signs of wear or damage, and replace the components if necessary.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the Fluid-Differential?
A:
The tools required include J 42055 Drivetrain Support Fixture.
By Bob
GM Specialist
01/11/2022Q: What should be done to install the Differential Cooler Fitting?
A:
You shall install the differential cooler fitting, connect the differential cooler line, remove the drain pan, and raise and secure the rear of the exhaust system.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Differential Cooler Pump Inlet Hose?
A:
The proper way is to install the differential cooler inlet pipe, connect the differential cooler pump inlet pipe to both the differential cooler pump and the differential, and raise and secure the rear of the exhaust system.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Differential Cooler Pump Outlet Hose?
A:
You shall install the differential cooler outlet pipe, connect the differential cooler pump outlet pipe, remove the drain pan, and raise and secure the rear of the exhaust system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Differential Cooler Pump Outlet Hose?
A:
You shall lower and support the rear of the exhaust system, install a drain pan, disconnect the differential cooler pump outlet pipe, and remove the outlet pipe.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Differential Cooler Adapter Nut?
A:
The proper way is to install the differential cooler adaptor nut and the differential cooler pump inlet pipe.
By Bob
GM Specialist
01/11/2022Q: What should be done to clean and inspect the Differential Carrier?
A:
You shall clean the differential carrier in the solvent, and inspect for the following conditions: Damage to threaded bolt holes, broken flanges, restrictions within the internal oil passages, damaged case or cover sealing surfaces, and damage to the O-ring seal grooves and porosity.
By Bob
GM Specialist
01/11/2022See more FAQs (16)