2007 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2007 Chevrolet Corvette Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Chevrolet Corvette | All Trims | 8 Cyl 6.0L
2007 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
FAQ for Coolant Temperature Sensors Repair
Q: What is the installation procedure for the Engine Coolant Temperature Sensor?
A:
The procedure is to install the ECT sensor and connect the ECT sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Engine Coolant Temperature Sensor?
A:
The proper way is to disconnect the harness connector and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Water Pump (7.0L)?
A:
The procedure is to remove the air cleaner intake duct, the accessory drive belt, the inlet and outlet hoses, the heater inlet and surge tank outlet hoses, the Water Pump, and the water pump gaskets.
Q: What is the installation procedure for the Auxiliary Engine Oil Cooler?
A:
The procedure is to install new Engine Oil Cooler hose/pipe seals, the external engine oil cooler, the engine oil cooler hose/pipes, the left wheelhouse extension, and the left fender liner.
Q: What should be noticed while removing the Radiator?
A:
You shall lift the cooling fan and shroud assembly to disengage the tabs from the Radiator slots.