Part Description: 2007 Chevrolet Corvette Hose Asm, Rear Brake
More Info
Vehicle Fitment
2007 Chevrolet Corvette | 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Brake Line Repair
Q: What is the preliminary procedure for servicing the Front Brake Caliper Cooling Duct (Y67)?
A:
You shall remove the appropriate front wheelhouse liner.
By Bob
GM Specialist
29/10/2022
Q: How many bolts does the Brake Caliper Cooling Duct have?
A:
It has 1 bolt.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the Brake Caliper Cooling Duct Bolt?
A:
It is 3 N.m (27 lb in).
By Bob
GM Specialist
29/10/2022
Q: What is the preliminary procedure for servicing the Rear Brake Caliper Cooling Air Scoop?
A:
The procedure is to raise and support the vehicle and remove the rear tire and wheel assembly and the front portion of the rear wheelhouse liner.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What should be noticed while dealing with the washer?
A:
You shall cap or plug the brake caliper to prevent contamination of the brake caliper and to prevent fluid leakage, do not reuse the washers, and check and make sure that one or both of the washers are not stuck to the Brake Hose caliper or hose.
Q: What is the removal procedure for the Hydraulic Clutch Hose/Pipe?
A:
The procedure is to remove the clutch actuator cylinder and the Hydraulic Hose and drain off the excess fluid.