FAQ for Brake Hose Repair
Q: What should be noted when servicing the Brake Pipe?
A:
You shall always use double-walled steel brake pipe when replacing brake pipes, and always use the correct fasteners and the original location for replacement brake pipes.
By BobGM Specialist
01/11/2022 Q: What should be noticed while dealing with the washer?
A:
You shall cap or plug the brake caliper to prevent contamination of the brake caliper and to prevent fluid leakage, do not reuse the washers, and check and make sure that one or both of the washers are not stuck to the brake hose caliper or hose.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Brake Hose bolts?
A:
It is 45 N.m (33 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Brake Hose Bolt?
A:
It is 45 N.m (33 lb-ft).
By BobGM Specialist
01/11/2022 Q: What kind of tools will be required in the replacement of the brake pipe?
A:
The tools required include J 45405 Pipe Flaring Tool Kit.
By BobGM Specialist
01/11/2022 Q: How many washers does the Rear Brake Hose (JL9-J55) need?
A:
It needs 2 washers.
By BobGM Specialist
01/11/2022 Q: What is the preliminary procedure for servicing the Front Brake Hose?
A:
The procedure is to raise the vehicle, remove the tire and wheel, and rotate the front hub to gain access to the brake hose.
By BobGM Specialist
01/11/2022 See more FAQs (2)