Part Description: 2007 Chevrolet Colorado Actuator
More Info
Vehicle Fitment
2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2007 Chevrolet Colorado Hvac Air Inlet Door Actuator
More Info
Vehicle Fitment
2007 Chevrolet Colorado | All Trims | All Engines
$29.33
FAQ for Hvac Heater Blend Door Actuator Repair
Q: How to install the Recirculation Actuator?
A:
You should install the recirculation actuator, and the screws to the recirculation actuator, then connect the electrical connector to the recirculation actuator and install the HVAC module assembly.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Recirculation Actuator?
A:
You need to remove the HVAC module assembly, and the recirculation actuator screws, then remove the electrical connector from the recirculation actuator and remove the recirculation actuator.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Ambient Air Temperature Sensor?
A:
You should position the sensor to the radiator support bracket, install the sensor, connect the electrical connector to the ambient Air Temperature Sensor, and install the air inlet grille.
Q: How to remove the Blower Motor?
A:
You need to remove the right hinge pillar trim panel, remove the Blower Motor mounting screws, remove the blower motor cooling tube, then disconnect the blower motor electrical connector, and remove the blower motor.
Q: How to remove the Blower Motor Resistor Assembly?
A:
You need to disconnect the Blower Motor Resistor electrical connector, remove the blower motor resistor mounting screws, then remove the blower motor resistor.