Part Description: 2007 Chevrolet Colorado Heater Core
More Info
Vehicle Fitment
2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$86.04MSRP: $162.37
You Save: $76.33 (48%)
FAQ for Heater Core Repair
Q: What is the recommended torque for the heater core clamp screws?
A:
The recommended torque is 1.9 N.m (17 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the heater core pipes clamp screw?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to install the Heater Core?
A:
You should install the heater core, the heater core clamp, the heater core clamp screws, the heater core pipes clamp, the heater core pipes clamp screw, and the HVAC module assembly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Ambient Air Temperature Sensor?
A:
You should position the sensor to the radiator support bracket, install the sensor, connect the electrical connector to the ambient Air Temperature Sensor, and install the air inlet grille.
Q: How to remove the Blower Motor?
A:
You need to remove the right hinge pillar trim panel, remove the Blower Motor mounting screws, remove the blower motor cooling tube, then disconnect the blower motor electrical connector, and remove the blower motor.
Q: How to remove the Blower Motor Resistor Assembly?
A:
You need to disconnect the Blower Motor Resistor electrical connector, remove the blower motor resistor mounting screws, then remove the blower motor resistor.