< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Colorado Drive Shaft
PartNumber: 25843685
Product Specifications- Notes: Canyon, Colorado
- Other Names: Drive Shaft
- Item Dimensions: 35.4 x 7.3 x 6.2 inches
- Item Weight: 15.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15104642
- Part Description: 2007 Chevrolet Colorado Drive Shaft
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$593.09 MSRP:$945.95You Save: $352.86 (38%)
Dorman® OE Solutions Front Driveshaft for 2007 Chevrolet Colorado
PartNumber: 936-113Product Specifications- Drive Shaft Diameter (In): 2"
- Drive Shaft Wall Thickness (In): 0.065"
- Greaseable Drive Shaft: Yes
- Length: 28.5"
- Material: Steel
- OE Part Number: 15104642
- Outside Diameter: 2"
- Overall Length Adjustable: No
- Product Condition: New
- Transmission Type: Automatic
- UPC: 037495121682
- Wall Thickness: 0.065"
- Part Description: 2007 Chevrolet Colorado OE Solutions Front Driveshaft
Vehicle Fitment- 2007 Chevrolet Colorado | All Trims | All Engines
$278.21
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2007 Chevrolet Colorado
PartNumber: 65-9516Product Specifications- Notes: with 27-5/8" (701 mm) Long Driveshaft;Square flange on CV;Measurement is taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 27.625"
- Length (mm): 701
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2007 Chevrolet Colorado Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2007 Chevrolet Colorado | All Trims | All Engines
$282.62
Dorman® OE Solutions Rear Driveshaft for 2007 Chevrolet Colorado
PartNumber: 936-291Product Specifications- Drive Shaft Diameter (In): 3.5 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Greaseable Drive Shaft: No
- Length: 60"
- Material: Steel
- OE Part Number: 15173138, 15828017, 15286715, 15126587
- Outside Diameter: 3.5"
- Overall Length Adjustable: No
- Transmission Type: Automatic/Manual
- UPC: 037495123501
- Wall Thickness: 0.083"
- Part Description: 2007 Chevrolet Colorado OE Solutions Rear Driveshaft
Vehicle Fitment- 2007 Chevrolet Colorado | All Trims | All Engines
$306.06OEM (Genuine) 2007 Chevrolet Colorado Propeller Shaft Assembly
PartNumber: 22811801
Product Specifications- Notes: Canyon, Colorado; 2WD; Extended & Crew Cab; 1 Piece Drive Shaft;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 1 Piece Drive Shaft; Canyon, Colorado; 2WD; Extended & Crew Cab; 1 Piece Drive Shaft; Off Road;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 1 Piece Drive Shaft; Off Road
- Other Names: Drive Shaft
- Item Dimensions: 77.9 x 4.2 x 4.1 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25787945
- Part Description: 2007 Chevrolet Colorado Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Propeller Shaft Assembly
PartNumber: 15286715
Product Specifications- Notes: One Piece; Canyon, Colorado; 2WD; Standard Cab; 111.2 Wheelbase; W/O 5.3l
- Other Names: Drive Shaft, Drive Shaft Assembly
- Item Dimensions: 64.0 x 4.0 x 4.1 inches
- Item Weight: 18.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Drive Shaft (Lh)
PartNumber: 19208246
Product Specifications- Notes: 2WD, W/Z71-Off Road Pkg;4WD; Canyon, Colorado; 2WD; W/Off Road Pkg.; Left;Canyon, Colorado; 4WD; Left
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 46.6 x 10.6 x 8.5 inches
- Item Weight: 19.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479337
- Part Description: 2007 Chevrolet Colorado Rear Axle Drive Shaft (Lh)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Axle Assembly
PartNumber: 88964475
Product Specifications- Notes: 4WD; Canyon, Colorado
- Location: Driver Side; Passenger Side
- Other Names: Axle Assembly
- Item Dimensions: 6.1 x 6.2 x 29.4 inches
- Item Weight: 16.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Axle Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Assembly (3.73 Ratio)
PartNumber: 25814903
Product Specifications- Notes: W/O Locking Diff, 3.73 Ratio
- Other Names: Axle Assembly
- Item Dimensions: 67.2 x 18.9 x 13.3 inches
- Item Weight: 82.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Rear Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Assembly (3.73 Ratio)
PartNumber: 25814898Product Specifications- Notes: W/Locking Diff, 3.73 Ratio
- Other Names: Axle Assembly
- Item Dimensions: 66.0 x 18.9 x 13.3 inches
- Item Weight: 77.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Rear Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Axle Assembly (3.73 Ratio)
PartNumber: 20849983
Product Specifications- Notes: 4WD, 3.73 Ratio; Canyon, Colorado; 3.73 Ratio
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Replaces: 15876777
- Part Description: 2007 Chevrolet Colorado Front Axle Assembly (3.73 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Axle Assembly (4.10 Ratio)
PartNumber: 15876776Product Specifications- Notes: 4WD, 4.10 Ratio; Canyon, Colorado; 4.10 Ratio
- Other Names: Axle Assembly, Differential Assembly
- Fitment Type: Direct Replacement
- Replaces: 15244551
- Part Description: 2007 Chevrolet Colorado Front Axle Assembly (4.10 Ratio)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Drive Shaft (Rh)
PartNumber: 19208248Product Specifications- Notes: 2WD, W/Z71-Off Road Pkg;4WD; Canyon, Colorado; 2WD; W/Off Road Pkg.; Right;Canyon, Colorado; 4WD; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 37.1 x 7.6 x 8.1 inches
- Item Weight: 18.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479336
- Part Description: 2007 Chevrolet Colorado Rear Axle Drive Shaft (Rh)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Drive Shaft (Lh)
PartNumber: 19207871
Product Specifications- Notes: 2WD, W/O Z71-Off Road Pk; Canyon, Colorado; 2WD; W/O Off Road Pkg.; Left
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 36.4 x 7.7 x 8.0 inches
- Item Weight: 18.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479339
- Part Description: 2007 Chevrolet Colorado Rear Axle Drive Shaft (Lh)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Rear Axle Drive Shaft (Rh)
PartNumber: 19207872
Product Specifications- Notes: 2WD, W/O Z71-Off Road Pk; Canyon, Colorado; 2WD; W/O Off Road Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 36.4 x 7.7 x 7.8 inches
- Item Weight: 18.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479338
- Part Description: 2007 Chevrolet Colorado Rear Axle Drive Shaft (Rh)
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Propeller Shaft Assembly
PartNumber: 25787947
Product Specifications- Notes: Canyon, Colorado; 4WD; W/O 5.3l
- Other Names: Drive Shaft
- Item Dimensions: 65.9 x 4.1 x 4.2 inches
- Item Weight: 15.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15116624
- Part Description: 2007 Chevrolet Colorado Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Propeller Shaft Assembly
PartNumber: 25787946
Product Specifications- Notes: Canyon, Colorado; 4WD; W/O 5.3l
- Other Names: Drive Shaft
- Item Dimensions: 50.5 x 3.9 x 4.0 inches
- Item Weight: 17.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front & Rear Propeller Shaft Assembly
PartNumber: 25787948
Product Specifications- Notes: Two Piece; Canyon, Colorado; 2WD; Extended & Crew Cab; 2 Piece Drive Shaft; 2nd Design;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 2 Piece Drive Shaft; Canyon, Colorado; 2WD; Extended & Crew Cab; 2 Piece Drive Shaft; 2nd Design; Chassis Pkg.;Canyon, Colorado; 2WD; Standard Cab; 125.9 Wheelbase; 2 Piece Drive Shaft; Chassis Pkg.
- Other Names: Drive Shaft, Drive Shaft Assembly
- Item Dimensions: 92.0 x 6.9 x 8.8 inches
- Item Weight: 55.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15236807
- Part Description: 2007 Chevrolet Colorado Front & Rear Propeller Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Front Wheel Drive Intermediate Shaft Assembly
PartNumber: 19210911
Product Specifications- Notes: 4WD; Canyon, Colorado
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 19.1 x 4.9 x 4.9 inches
- Item Weight: 6.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12479300
- Part Description: 2007 Chevrolet Colorado Front Wheel Drive Intermediate Shaft Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Driveshaft
PartNumber: 15292180Product Specifications- Notes: W/Locking Diff, 4.10 Ratio
- Part Description: 2007 Chevrolet Colorado Driveshaft
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
OEM (Genuine) 2007 Chevrolet Colorado Axle Assembly
PartNumber: 25814905Product Specifications- Notes: W/O Locking Diff, 4.10 Ratio
- Part Description: 2007 Chevrolet Colorado Axle Assembly
Vehicle Fitment- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Driveshaft Repair
Q: How to remove the Front Propeller Shaft?
A:
You need to mark the front U-joint to the pinion yoke on the front differential, next mark the relationship of the rear U-joint to the transfer case drive flange and mark the relationship of the rear U-joint to the transfer case drive flange, then remove the retaining nuts and bolts from the drive flange, remove the clamps and retaining bolts from the front drive axle pinion flange, remove the front propeller shaft from the vehicle, then use tape and or a rubber band, wrap the front U-joint bearing caps to ensure the caps do not separate from the U-joint.
By Bob
GM Specialist
29/10/2022Q: How to install the Propeller Shaft-Two Piece?
A:
You should align the reference marks on the propeller shaft to the transmission, install the propeller shaft in the transmission, the center bearing to the crossmember, and the center bearing mounting bolts, then rotate the propeller shaft so that the alignment marks and the pinion yoke are in alignment, remove the tape and or rubber band, and position the U-Joint in the pinion yoke, install the clamps and retaining bolts, finally, double check the alignment marks to ensure that they are aligned properly.
By Bob
GM Specialist
29/10/2022Q: How to install the Propeller Shaft-One Piece?
A:
You should remove the tape or rubber band from the U-Joint, install the propeller shaft in the transmission/transfer case, align the propeller shaft with the reference marks on the pinion flange, then install the clamps and retaining bolts.
By Bob
GM Specialist
29/10/2022Q: How to remove the Propeller Shaft-One Piece?
A:
You need to place the transmission in neutral, release the park brake, mark the rear universal joint to the drive shaft flange, then remove the retaining bolts and clamps, the propeller shaft from the pinion drive flange, and the propeller shaft from the transmission/transfer case, finally use tape or a rubber band to wrap the U-Joint bearing caps to ensure the bearing caps do not separate from the U-Joint.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the bolts securing onto the front propeller U-joint clamps?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the center-bearing mounting bolts?
A:
The recommended torque is 80 N.m (59 lb-ft).
By Bob
GM Specialist
29/10/2022See more FAQs (1)