FAQ for Door Seal Repair
Q: How to install the Weatherstrip Rear Side Access Door?
A:
You should position the weatherstrip to the rear side access door, install the upper molded detail and the lower molded detail to the front of the rear side access door using the integral retaining pins, and install the weatherstrip around the rear door frame using the integral retainers, finally close the front and rear side access doors.
By BobGM Specialist
01/11/2022 Q: How to install the Auxiliary Weatherstrip?
A:
You should install the auxiliary weatherstrip to the roof pinch-weld flange by pressing the weatherstrip onto the roof flange, until it is fully seated, then close the front and rear doors, as necessary.
By BobGM Specialist
01/11/2022 Q: What kind of special tools will be required in the replacement of the Front Side Door Weatherstrip (Extended)?
A:
The tools required include J 38778 Door Trim Pad Clip Remover or Equivalent.
By BobGM Specialist
01/11/2022 Q: What kind of special tools will be required when serving the Rear Door Weatherstrip?
A:
The tools required include J 38778 Door Trim Pad Clip Remover or Equivalent.
By BobGM Specialist
01/11/2022 Q: How to remove the Auxiliary Weatherstrip?
A:
You need to open the front and rear doors as necessary, next remove the auxiliary weatherstrip by pulling the weatherstrip from the roof pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: How to remove the Rear Door Opening Weatherstrip?
A:
You need to open the rear door, remove the lower center pillar trim panel, then remove the rear door opening weatherstrip from the door opening pinch-weld flange, and remove the rear door opening weatherstrip.
By BobGM Specialist
01/11/2022 Q: How to install the Front Side Door Weatherstrip (Extended)?
A:
You should position the weatherstrip to the front door, install the upper weatherstrip mold and the lower weatherstrip mold to the door using the integral weatherstrip pushpin, then install the weatherstrip around the front door frame using the integral retainers, and finally close the front door.
By BobGM Specialist
01/11/2022 Q: How to install the Front Side Door Weatherstrip (Regular, Crew)?
A:
You should position the weatherstrip to the front door, install the weatherstrip around the front door frame using the integral retainers, then close the front door.
By BobGM Specialist
01/11/2022 Q: How to install the Rear Side Access Door Auxiliary Weatherstrip?
A:
You should install the rear door auxiliary weatherstrip to the rear door pinch-weld flange, by pressing the weatherstrip into place until it is fully seated, then close the front and side doors.
By BobGM Specialist
01/11/2022 Q: What kind of special tools will be required when serving the Weatherstrip Rear Side Access Door?
A:
The tools required include J 38778 Door Trim Pad Clip Remover or Equivalent.
By BobGM Specialist
01/11/2022 See more FAQs (16)