Part Description: 2007 Chevrolet Colorado GENERATOR Assembly
More Info
Vehicle Fitment
2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Alternator Repair
Q: What is the recommended torque for the A/C compressor mounting bolts?
A:
The recommended torque is 50 N.m (37 lb-ft).
By Bob
GM Specialist
28/10/2022
Q: How to install the Generator?
A:
You need to position the generator to the engine, install the engine lift bracket, install the generator mounting bolts, connect the generator leads to the generator and install the generator output BAT terminal nut, then press the protective boot onto the generator output BAT terminal, connect the wiring harness connector to the generator, and raise and support the vehicle only high enough to access the A/C compressor through the wheelhouse, position the A/C compressor to the engine, and install the A/C compressor mounting bolts, attach the A/C compressor electrical connector to the bracket, then install the left wheelhouse liner and the left front wheel, lower the vehicle, install the drive belt, finally connect the battery negative cable.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How to install the Starter Motor?
A:
You should position the Starter motor over the stud, install the starter motor mounting nut and bolt, connect the battery positive cable to the starter and install the starter terminal nut, then connect the lead to the starter solenoid and install the starter solenoid S terminal nut, and install the intake manifold.
Q: What is the recommended torque for the nuts securing the battery cables to the underhood fuse block?