< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2007 Chevrolet Colorado Switch Actuator
PartNumber: 26060073
Product Specifications- Notes: 4WD; Canyon, Colorado
- Other Names: Actuator, Switch, Switch Actuator
- Item Dimensions: 8.3 x 3.2 x 3.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Colorado Switch Actuator
Vehicle Fitment- 2007 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$145.97 MSRP:$241.60You Save: $95.63 (40%)
Dorman® OE Solutions 4Wd Actuator for 2007 Chevrolet Colorado
PartNumber: 600-101Product Specifications- Housing Material: Plastic
- OE Part Number: 26060073, 8-26060-073-0
- Package Contents: 4wd Actuator Assembly
- Terminal Quantity: 5
- Terminal Type: Blade
- UPC: 019495058922
- Wiring Harness Included: No
- Part Description: 2007 Chevrolet Colorado OE Solutions 4Wd Actuator
Vehicle Fitment- 2007 Chevrolet Colorado | All Trims | All Engines
$92.33
FAQ for 4Wd Actuator Repair
Q: What is the recommended torque for the encoder motor mounting bolts?
A:
The recommended torque is 22 N.m (16 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Transfer Case Encoder Motor?
A:
You need to raise and support the vehicle, next disconnect the electrical connector and the vent hose from the encoder motor, then remove the encoder motor mounting bolts, and remove the encoder motor and O-ring seal from the transfer case. Discard the O-ring seal.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the electric motor actuator?
A:
The recommended torque is 22 N.m (16 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Electric Motor Actuator?
A:
You should install the electric motor actuator, then install the electrical connector, install the EPS, and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Electric Motor Actuator?
A:
You need to raise and support the vehicle, remove the engine protection shield (EPS), and the electrical connector, and remove the electric motor actuator.
By Bob
GM Specialist
01/11/2022