Part Description: 2007 Chevrolet Cobalt Steering Knuckle
More Info
Vehicle Fitment
2007 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Steering Knuckle Repair
Q: What is the recommended torque for the bolts?
A:
The recommended torque is 115 Nm (85 LB ft).
By Bob
GM Specialist
02/11/2022
Q: How many bolts does the caliper bracket have?
A:
The caliper bracket has 2 bolts.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the wheel cylinder?
A:
The procedure is to remove the tire and wheel assembly, the brake drum, the Wheel Cylinder bleeder cap and valve, the wheel cylinder mounting bolts, and the wheel cylinder.
Q: What should be known about gas-charged shock absorbers?
A:
You should be aware that gas-charged Shock Absorbers contain high-pressure gas. You should not remove the snap ring from inside the top of the tube. If the snap ring is removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
Q: How to inspect the electric power steering (EPS)?
A:
You should install a scan tool, start the engine, turn the steering wheel 90 degrees to the left, observe the Torque Sensor Main data parameter in the EPS data list, and then replace the Steering Column assembly.