Part Description: 2007 Chevrolet Cobalt Gear Kit-Steering
More Info
Vehicle Fitment
2007 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Steering Gearbox Repair
Q: What is the proper way to install the power steering gear?
A:
The proper way is to install the steering gear, the steering gear bolts, the rear transmission mount, a new intermediate shaft pinch bolt, and the front wheels, and then adjust the toe.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the power steering gear?
A:
The procedure is to remove the front wheels, the steering gear bolts, the rear transmission mount, and the steering gear.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the wheel cylinder?
A:
The procedure is to remove the tire and wheel assembly, the brake drum, the Wheel Cylinder bleeder cap and valve, the wheel cylinder mounting bolts, and the wheel cylinder.
Q: What should be known about gas-charged shock absorbers?
A:
You should be aware that gas-charged Shock Absorbers contain high-pressure gas. You should not remove the snap ring from inside the top of the tube. If the snap ring is removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
Q: How to inspect the electric power steering (EPS)?
A:
You should install a scan tool, start the engine, turn the steering wheel 90 degrees to the left, observe the Torque Sensor Main data parameter in the EPS data list, and then replace the Steering Column assembly.