Part Description: 2007 Chevrolet Cobalt Hinge Asm-Rear Side Door Upper
More Info
Vehicle Fitment
2007 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Door Hinge Repair
Q: How many bolts does the rear side door hinge have?
A:
The rear side door hinge has 2 bolts.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the bolts?
A:
The recommended torque is 35 Nm (26 LB ft).
By Bob
GM Specialist
01/11/2022
Q: How many bolts does the front side door hinge have?
A:
The front side door hinge has 2 bolts.
By Bob
GM Specialist
01/11/2022
Q: How many screws does the front side door lock striker have?
A:
The front side door lock striker has 2 screws.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the screws?
A:
The recommended torque is 25 Nm (18 LB ft).
By Bob
GM Specialist
29/10/2022
Q: What is the procedure for Front Door Striker Adjustments?
A:
The procedure is to loosen the striker bolts, attach the striker bolts, pull on the outside handle, open the door, and then touch up any exposed or unpainted surface on the lock pillar.
By Bob
GM Specialist
29/10/2022
Q: What is the procedure for the Rear Door Striker adjustment?
A:
The procedure is to loosen the striker bolts, attach the striker bolts, pull on the outside handle, push the door against the body, open the door, tighten the bolts, and then touch up any exposed or unpainted surface.
By Bob
GM Specialist
29/10/2022
See more FAQs (2)
FAQ for Other Repair Info
Q: What should be done for the door jamb switch rear?
A:
You should use a small flat-bladed tool to assist in the removal of the rear Door Jamb Switch from the B pillar.
Q: What is the recommended torque for the assist handle screws?
A:
The recommended torque is 6 Nm (53 lb in).
Q: What should be noticed about the lick cylinder rod?
A:
You should use a flat-bladed tool to release the rod.