2007 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$11.30MSRP: $20.44
You Save: $9.14 (45%)
FAQ for Blower Motor Resistor Repair
Q: What is the proper way to install the blower motor resistor?
A:
The proper way is to snap the blower motor resistor into the HVAC module, and then connect the blower motor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the blower motor resistor?
A:
The procedure is to disconnect the blower motor resistor electrical connector and then unsnap the blower motor resistor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the heater assembly?
A:
The procedure is to remove the HVAC module, the Heater Core cover, the heater core, the lower HVAC case heat stakes, and the lower HVAC case.
Q: What is the proper way to install the blower motor?
A:
The proper way is to install the Blower Motor, the blower motor nuts, the blower motor, the service ring, and the lower blower motor cover, and then connect the blower motor electrical connector.
Q: What is the proper way to install the condenser (RPO LSJ)?
A:
The proper way is to install the right and left radiator side baffles, the condenser bolts, the condenser tube and new seal washer, and the charge air cooler radiator.