< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Cobalt
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Cobalt Side Sensor
PartNumber: 15212949
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.0 x 1.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Cobalt Side Sensor
Vehicle Fitment- 2007 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$146.03 MSRP:$209.88You Save: $63.85 (31%)
OEM (Genuine) 2007 Chevrolet Cobalt Front Sensor
PartNumber: 15212951
Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 1.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22694705
- Part Description: 2007 Chevrolet Cobalt Front Sensor
Vehicle Fitment- 2007 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$49.60 MSRP:$74.85You Save: $25.25 (34%)
FAQ for Air Bag Sensor Repair
Q: What should be inspected after collision?
A:
You should inspect the steering column, the instrument panel (I/P) knee bolsters and mounting points, the I/P brackets, braces, the seat belts, the I/P cross-car beam, the I/P mounting points, and brackets, and the roof and headliner mounting points.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the inflatable restraint front-end sensor?
A:
You should disable the supplemental inflatable restraint system.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the inflatable restraint side impact sensor?
A:
You should disable the SIR system, and remove the door trim panel and the water deflector.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the side impact sensor have?
A:
The side impact sensor has 2 bolts.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the forward discriminating sensor have?
A:
The forward discriminating sensor has 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the inflatable restraint sensing and diagnostic module?
A:
You should disable the supplemental inflatable restraint system.
By Bob
GM Specialist
28/10/2022Q: What is the enabling procedure for the airbag fuse?
A:
The procedure is to place the ignition in the OFF position, install the fuse supplying power to the SDM, turn the ignition switch to the ON position, and then perform the Diagnostic System Check-Vehicle if the AIR BAG warning indicator does not operate as described.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the bolts?
A:
The recommended torque is 10 Nm (89 LB in).
By Bob
GM Specialist
28/10/2022Q: How many bolts does the front floor console armrest assembly have?
A:
The front floor console armrest assembly has 2 bolts.
By Bob
GM Specialist
28/10/2022Q: What is the disabling procedure for the airbag fuse?
A:
The procedure is to turn the steering wheel to make the wheels straight ahead, place the ignition in the OFF position, locate and remove the fuse supplying power to the SDM, and then wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022See more FAQs (5)