Part Description: 2007 Chevrolet Aveo Pipe, P/S Fluid Reservoir Inlet
More Info
Vehicle Fitment
2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Power Steering Hose Repair
Q: What is the recommended torque for the steering gear outlet pipe fittings?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the power steering pump pressure line union nut?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the air cleaner housing bolts?
A:
The recommended torque is 12 N.m (106 lb in).
By Bob
GM Specialist
02/11/2022
Q: What should be noticed about the Power Steering Hose Disconnected?
A:
Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the disassembly procedure for the Wheel Cylinder Overhaul?
A:
Remove the Wheel Cylinder assembly from the backing plate, twist off the boots, the pistons, and the seals from each end of the wheel cylinder, remove the spring assembly and remove the bleeder cap and the bleeder valve.
Q: What is the inspection procedure for the Brake Drum?
A:
Clean the brake components. inspect the Brake Drum, and replace the drum if necessary. apply lubricant to the adjuster assembly. and inspect the threads of the adjuster assembly for smooth rotation.
Q: What is the removal procedure for the Rear Brake Hose?
A:
Disconnect the brake lines, and remove both Brake Hose E-ring retainers and the brake hoses from the brackets.