< Back ×
My Vehicle Change Vehicle
2007 Chevrolet Aveo
< Back to View All
Coil Springs
- Department
- Prices
OEM (Genuine) 2007 Chevrolet Aveo Dust Shield
PartNumber: 96535008
Product Specifications- Notes: Aveo, Aveo5; Sedan
- Location: Driver Side; Passenger Side
- Other Names: Dust Cover, Dust Shield, Spring
- Item Dimensions: 6.1 x 4.8 x 4.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Dust Shield
Vehicle Fitment- 2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$10.12 MSRP:$18.30You Save: $8.18 (45%)
OEM (Genuine) 2007 Chevrolet Aveo Coil Spring
PartNumber: 96653237
Product Specifications- Notes: Aveo, Aveo5; Sedan
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Coil Spring
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
OEM (Genuine) 2007 Chevrolet Aveo Rear Spring
PartNumber: 96653220
Product Specifications- Notes: Aveo, Aveo5; Hatchback; Sedan
- Location: Driver Side; Passenger Side
- Other Names: Coil Spring, Spring
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Rear Spring
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
OEM (Genuine) 2007 Chevrolet Aveo Rear Spring
PartNumber: 96653225
Product Specifications- Notes: Aveo, Aveo5; Notchback
- Other Names: Coil Spring, Spring
- Fitment Type: Direct Replacement
- Part Description: 2007 Chevrolet Aveo Rear Spring
Vehicle Fitment- 2007 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Coil Springs Repair
Q: What should be done before installing the Coil Spring?
A:
Before installing the springs, it will be necessary to install the upper insulators to the body and adhesive to keep them in position while raising the axle assembly and the springs.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while serving the Suspension Spring?
A:
You should use the proper tools to support the lower control arm when removing the coil spring. The coil spring is under extreme pressure and can become a projectile should the spring separate from the lower control arm before all of the tension is relieved.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the piston rod nut?
A:
The recommended torque is 60 N.m (44 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be used in the removal of the Strut, Strut Component, and/or Spring?
A:
KM-329-A Spring Compressor, J 42468 Front Strut Mount Nut Wrench.
By Bob
GM Specialist
01/11/2022