Part Description: 2007 Chevrolet Aveo Cylinder Asm, Brake Master
More Info
Vehicle Fitment
2007 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Brake Master Cylinder Repair
Q: What is the removal procedure for the Master Cylinder Reservoir?
A:
Disconnect the electrical connector, release and remove the reservoir, and remove the reservoir seals from the master cylinder body.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the brake lines?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What should you know about the Rubber parts and retaining rings?
A:
Rubber parts and retaining rings must be discarded and replaced with new parts.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the master cylinder attaching nuts?
A:
The recommended torque is 18 N.m (13 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: Can you use abrasives in the master cylinder bore?
A:
No, do not use abrasives in the master cylinder bore.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the disassembly procedure for the Wheel Cylinder Overhaul?
A:
Remove the Wheel Cylinder assembly from the backing plate, twist off the boots, the pistons, and the seals from each end of the wheel cylinder, remove the spring assembly and remove the bleeder cap and the bleeder valve.
Q: What is the recommended torque for the booster-to-support bracket nuts?
A:
The recommended torque is 12 N.m (9 lb-ft).
Q: What is the recommended torque for the brake lines?