Part Description: 2007 Cadillac XLR Remanufactured Wiper Motor
More Info
Vehicle Fitment
2007 Cadillac XLR | All Trims | All Engines
$79.38
FAQ for Windshield Wiper Motors Repair
Q: What is the removal procedure for the air inlet grille panel?
A:
The procedure is to remove the windshield wiper arms, remove the push-in retainers securing the air inlet grille panel to the vehicle, remove the retainers securing the sides of the grille panel to the fenders and remove the air inlet grille panel.
By Bob
GM Specialist
01/11/2022
Q: How do you install the air inlet grille panel?
A:
You can position the air inlet grille panel to the vehicle, connect the washer hose connector, install the grille panel with the tabs, install the retainers securing the sides of the grille panel to the fenders, install the push-in retainers securing the grille panel to the vehicle, install the windshield wiper arms and close the hood.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the wiper motor screws?
A:
You can tighten the screws to 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the wiper motor?
A:
The procedure is to remove the following: the air inlet grille panel, the wiper drive system module, the wiper motor crank arm, the wiper motor mounting screws, and the wiper motor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you install the washer pump?
A:
You can install the Washer Pump rubber grommet into the washer solvent container, lubricate the pump body and grommet with washer fluid, insert the pump body through the grommet, connect the electrical connector to the washer pump, connect the washer pump output hose to the washer pump, install the left front lower wheelhouse splash shield and fasteners and install the left front wheel.
Q: What is the removal procedure for the wiper blade element?
A:
The procedure is to remove the Wiper Blade from the wiper arm and pull the blade element from the wiper blade.
Q: What should you ensure when replacing the washer solvent container level sensor?
A:
You should ensure that the hoist is clear of the left front fender to allow the lower fender to be moved away for access to the washer container.