< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2007 Cadillac XLR Rear Suspension Knuckle
PartNumber: 88965637
Product Specifications- Notes: Xlr; Left; Xlr; Right
- Location: Driver Side; Passenger Side
- Other Names: Knuckle
- Item Dimensions: 5.5 x 13.7 x 12.8 inches
- Item Weight: 6.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88964148
- Part Description: 2007 Cadillac XLR Rear Suspension Knuckle
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Knuckle
PartNumber: 88965638
Product Specifications- Notes: Xlr; Right; Xlr; Left
- Location: Passenger Side; Driver Side
- Other Names: Knuckle
- Item Dimensions: 13.5 x 13.0 x 5.5 inches
- Item Weight: 5.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88964149
- Part Description: 2007 Cadillac XLR Knuckle
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Steering Knuckle Repair
Q: How do you install the steering knuckle?
A:
You can install the steering knuckle to the upper control arm and the lower control arm, install the steering linkage outer tie rod ball stud to the steering knuckle, install the stabilizer shaft link to the lower control arm, install the brake rotor and caliper and install the tire and wheel assembly.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the steering knuckle?
A:
The procedure is to remove the brake caliper and rotor, remove the stabilizer shaft link, remove the upper control arm ball joint stud, remove the lower ball joint stud and remove the steering knuckle.
By Bob
GM Specialist
02/11/2022Q: How do you install the knuckle?
A:
You can install the suspension knuckle to the lower control arm ball joint stud, install the suspension knuckle ball joint stud to the upper control arm, install the spindle nut, washer, and retainer, install the outer tie rod end to the suspension knuckle, install the brake rotor and caliper and install the tire and wheel assembly.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the knuckle?
A:
The procedure is to remove the following: the tire and wheel assembly, the brake rotor, the spindle nut retainer, the spindle nut, the washer, and the suspension knuckle.
By Bob
GM Specialist
02/11/2022