FAQ for Radiator Repair
Q: How do you install the radiator support?
A:
You can install the radiator support, install the radiator support bolts, connect the surge tank inlet hose assembly to the radiator support tabs, connect the MAF sensor wire to the radiator support retainer clip and install the air cleaner assembly.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the radiator support?
A:
The procedure is to remove the air cleaner assembly, disconnect the MAF sensor wire, disconnect the surge tank inlet hose assembly, remove the radiator support bolts and remove the radiator support.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the radiator?
A:
You should recover the refrigerant from the A/C system and drain the cooling system.
By BobGM Specialist
01/11/2022 Q: What is the first step of the installation procedure for the radiator air baffle assemblies and deflectors (front air deflectors)?
A:
The first step is to install the front air deflector.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the RH radiator air baffle lower screw?
A:
You can tighten the bolt to 2.5 N.m (22 lb in).
By BobGM Specialist
01/11/2022 Q: What should you remove when removing the front air deflector?
A:
You should remove the outermost front fascia screws to add additional clearance.
By BobGM Specialist
01/11/2022 Q: What tool can be used to disengage tension on the radiator inlet hose clamp at the radiator?
A:
You can use J 38185 Hose Clamp Pliers.
By BobGM Specialist
01/11/2022 Q: What should you remove before raising the vehicle?
A:
You should remove the cruise control bracket and remove the ambient air temperature sensor.
By BobGM Specialist
01/11/2022 See more FAQs (3)