< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2007 Cadillac XLR Adjust Switch
PartNumber: 12451439
Product Specifications- Notes: Adjust & Recline; Xlr; Left
- Location: Driver Side
- Item Dimensions: 7.2 x 7.2 x 6.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89043625
- Part Description: 2007 Cadillac XLR Adjust Switch
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$115.08 MSRP:$173.59You Save: $58.51 (34%)
OEM (Genuine) 2007 Cadillac XLR Adjust Switch
PartNumber: 10315826
Product Specifications- Notes: Lumbar
- Location: Driver Side; Passenger Side
- Other Names: Adjust Switch, Lumbar Switch, Switch
- Item Dimensions: 2.8 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25928038
- Part Description: 2007 Cadillac XLR Adjust Switch
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$29.96 MSRP:$45.19You Save: $15.23 (34%)
OEM (Genuine) 2007 Cadillac XLR Switch, Passenger Seat Adjuster & Reclining
PartNumber: 12451440
Product Specifications- Notes: Adjust & Recline; Xlr; Right
- Location: Passenger Side
- Item Dimensions: 4.2 x 4.0 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89042262
- Part Description: 2007 Cadillac XLR Switch, Passenger Seat Adjuster & Reclining
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Switch Asm-Driver Seat Adjuster Memory *Ebony
PartNumber: 10307969
Product Specifications- Notes: Memory; Xlr
- Location: Driver Side
- Other Names: Memory Switch, Switch
- Item Dimensions: 3.8 x 2.1 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac XLR Switch Asm-Driver Seat Adjuster Memory *Ebony
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Power Seat Switch Repair
Q: What is the removal procedure for the memory seat control module?
A:
The procedure is to remove the memory seat control module and disconnect the harness connectors.
By Bob
GM Specialist
02/11/2022Q: How do you install the memory seat control module?
A:
You can connect harness connectors to the memory seat control module, install the memory seat control module to the seat track assembly, install the seat, calibrate the seat and refer to Control Module References for programming and setup information.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the inflatable restraint seat position sensor?
A:
The procedure is to remove the seat, disconnect the electrical connector, drill out the rivets that retain the position sensor to the seat adjuster track bracket, and remove the position sensor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the passenger seat adjuster and recliner switch?
A:
The procedure is to remove the seat assembly, remove the finish side panel, disconnect the electrical connector, release the retainers to the switch and remove the seat switch.
By Bob
GM Specialist
01/11/2022Q: How do you install the lumbar switch?
A:
You can connect the electrical connector to the lumbar switch, install the lumbar switch to the finish panel and install the finish panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lumbar switch?
A:
The procedure is to remove the seat's outer finish panel, remove the switch and disconnect the electrical connector to the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: How do you install the inflatable restraint seat position sensor?
A:
You can install the position sensor to the seat adjuster bracket, install the rivets that retain the position sensor to the seat adjuster track bracket, connect the electrical connector to the position sensor and install the seat to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the passenger seat adjuster and recliner switch?
A:
You can install the seat switch to the finish panel, connect the electrical connector to the seat switch, install the finish side panel and install the seat assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the driver seat adjuster switch knob and passenger seat adjuster switch knob?
A:
The procedure is to raise the seat up, pry between the finished panel and the back of the switch knob, and remove the knob from the switch.
By Bob
GM Specialist
01/11/2022Q: How do you install the driver seat adjuster and recliner switch?
A:
You can install the seat switch to the finish panel, connect the electrical connector to the seat switch, install the finish side panel and install the seat assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (7)