< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
Oxygen Sensors
- Department
- Product Fit
- Brands
- Prices
OEM (Genuine) 2007 Cadillac XLR Oxygen Sensor
PartNumber: 12598296
Product Specifications- Notes: Front, 4.4 Liter;Front, 4.6 Liter; Xlr; Front; 4.4l;Xlr; Front; 4.6l
- Location: Driver Side; Passenger Side
- Other Names: Oxygen Sensor
- Item Dimensions: 8.2 x 3.1 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac XLR Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$58.53 MSRP:$110.46You Save: $51.93 (48%)
Denso® Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 234-4338Product Specifications- Notes: DENSO is the OE Manufacturer / Oxygen Sensor
- Connector Gender: Female
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Downstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511113176
- Wire Harness Length: 31.5" (800.1 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$84.43
Walker Products® Premium Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 250-24729Product Specifications- Connector Gender: Female
- Overall Length: 39.49"(1003.046 mm)
- Position: Upstream Driver Side
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620014383
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 35.94"(912.876 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Premium Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$68.09Walker Products® Premium Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 250-24722Product Specifications- Connector Gender: Male
- Overall Length: 33.58"(852.932 mm)
- Position: Downstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 0.71"(18.0 mm)
- UPC: 724620014338
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 30.04"(763.016 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Premium Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$63.13
Walker Products® Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 350-34231Product Specifications- Notes: Downstream; Left;Downstream; Right
- Connector Gender: Male
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 33.58"
- Position: Downstream Rear
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620090516
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 30.04"
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$54.65
Walker Products® Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 350-34127Product Specifications- Notes: Upstream; Right;Upstream; Left
- Connector Gender: Female
- Connector Shape: Radiused Polygon
- Installation Type: Threaded
- Overall Length: 39.49"
- Position: Upstream Passenger Side
- Sensor Type: Heated
- Thread Diameter: 18.0 mm
- UPC: 724620089503
- Wire Gauge Measurement: 20 Gauge
- Wire Harness Length: 35.94"
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$52.81OEM (Genuine) 2007 Cadillac XLR Sensor Asm-Heated Oxygen (Position 2)
PartNumber: 12598297Product Specifications- Notes: Rear, 4.4 Liter;Rear, 4.6 Liter; Xlr; Rear; 4.4l;Xlr; Rear; 4.6l
- Location: Driver Side; Passenger Side
- Other Names: Oxygen Sensor
- Item Dimensions: 8.2 x 3.1 x 3.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac XLR Sensor Asm-Heated Oxygen (Position 2)
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Denso® Oxygen Sensor for 2007 Cadillac XLR
PartNumber: 234-4335Product Specifications- Notes: DENSO is the OE Manufacturer / Oxygen Sensor
- Connector Gender: Male
- Installation Type: Screw
- O2 Sensor Configuration: Direct Fit
- Position: Upstream
- Sensor Type: Heated
- Thread Diameter: 0.71" (18 mm)
- UPC: 042511113145
- Wire Harness Length: 37.32" (947.9 mm)
- Wires Quantity: 4 Wire Leads
- Part Description: 2007 Cadillac XLR Oxygen Sensor
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.4L
- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
FAQ for Oxygen Sensor Repair
Q: What may cause the contamination of the oxygen sensor?
A:
The use of an inappropriate RTV sealant (not oxygen sensor safe) or excessive engine coolant or oil consumption may cause the contamination of the oxygen sensor.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the heated oxygen sensor (Bank 2 Sensor 1)?
A:
The procedure is to remove the electrical connector retainer, remove the oxygen sensor wire harnesses and remove the bank 2 sensor 1 oxygen sensor.
By Bob
GM Specialist
02/11/2022Q: What can be used to coat the threads of a reused sensor?
A:
You can coat the threads of a reused sensor with anti-seize compound P/N 5613695 or equivalent.
By Bob
GM Specialist
02/11/2022Q: What can be used to repair the engine harness?
A:
The engine harness may be repaired using Packard's Crimp and Splice Seals Terminal Repair Kit.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the bank 2 sensor 2 oxygen sensor to the exhaust manifold?
A:
You can tighten the heated oxygen sensor (HO2S) to 42 N.m (31 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How do you install the heated oxygen sensor (Bank 1 Sensor 1)?
A:
You can install the bank 1 sensor 1 oxygen sensor to the exhaust manifold, install the electrical connector retainer to the electrical connector, install both oxygen sensor electrical connector assemblies to the fuel rail brackets and install the oxygen sensor wire harness to the retainer.
By Bob
GM Specialist
02/11/2022Q: What is the purpose of handling the oxygen sensors carefully?
A:
The purpose is to prevent damage to the component.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the bank 1 sensor 2 oxygen sensor to the exhaust manifold?
A:
You can tighten the heated oxygen sensor (HO2S) to 42 N.m (31 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How do you install the heated oxygen sensor (Bank 2 Sensor 1)?
A:
You can install the bank 2 sensor 1 oxygen sensor, install the electrical connector retainer to the electrical connector, install both oxygen sensor electrical connector assemblies to the fuel rail brackets and install the oxygen sensor wire harnesses to the retainer.
By Bob
GM Specialist
02/11/2022Q: What should you perform when replacing the HO2S?
A:
You should perform a code clear with a scan tool and perform HO2S heater resistance learn reset with a scan tool.
By Bob
GM Specialist
02/11/2022See more FAQs (5)