Part Description: 2007 Cadillac XLR Manifold ABSolute Pressure Sensor
More Info
Vehicle Fitment
2007 Cadillac XLR | Base | 8 Cyl 4.6L
FAQ for MAP Sensor Repair
Q: How do you install the manifold absolute pressure sensor?
A:
You can install the MAP sensor into the intake manifold and connect the MAP sensor electrical connector.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the manifold absolute pressure sensor?
A:
The procedure is to turn the ignition OFF, disconnect the MAP sensor electrical connector, remove the MAP sensor from the intake manifold and inspect the MAP sensor grommet for wear or damage.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you install the throttle body assembly?
A:
You can install a new Throttle Body gasket into the groove on the rear side of the throttle body, install the throttle body assembly to the water outlet, install the throttle body attaching bolts, install the air intake duct and install the air cleaner assembly.
Q: How do you install the air cleaner element?
A:
You can install the NEW Air Filter(s), close the air cleaner housing cover(s), and position and engage the air cleaner housing cover latches.
Q: What is the removal procedure for the mass airflow sensor/intake air temperature sensor?
A:
The procedure is to remove the following: the air cleaner assembly, the air cleaner resonator duct clamp, the Mass Air Flow Sensor bolts, and the MAF sensor and seal.