< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Gates® Safety Stripe Hvac Heater Hose for 2007 Cadillac XLR
PartNumber: 28409Product Specifications- Notes: Cut to Length, 16"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2007 Cadillac XLR Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$44.06
Gates® Safety Stripe Hvac Heater Hose for 2007 Cadillac XLR
PartNumber: 28407Product Specifications- Notes: Cut to Length, 9"
- Centerline Length (in): 600"
- Inside Diameter 1 (in): 0.25"
- OE Part Number: 34580
- UPC: 072053133219
- Weight Per Length: 6 lbs./Carton
- Working Pressure (psi): 60
- Part Description: 2007 Cadillac XLR Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$31.48
Gates® Hvac Heater Molded Hose for 2007 Cadillac XLR
PartNumber: 18114Product Specifications- Notes: Cut to fit
- Centerline Length (in): 12.4"
- Inside Diameter 1 (in): 0.28"
- Number of Branches: 0
- UPC: 072053191448
- Part Description: 2007 Cadillac XLR Hvac Heater Molded Hose
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$14.18
Gates® Hvac Heater Molded Hose for 2007 Cadillac XLR
PartNumber: 18030Product Specifications- Notes: Cut to fit
- Centerline Length (in): 9.6"
- Inside Diameter 1 (in): 0.38"
- Number of Branches: 0
- OE Part Number: 31072
- UPC: 072053178043
- Part Description: 2007 Cadillac XLR Hvac Heater Molded Hose
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$11.36
Gates® 90 Degree Hvac Heater Molded Hose for 2007 Cadillac XLR
PartNumber: 28474Product Specifications- Angle: 90
- Arm Length 1 (in): 4
- Arm Length 1 (mm): 102
- Arm Length 2 (in): 6
- Arm Length 2 (mm): 152
- Centerline Length (in): 10
- Centerline Length (mm): 254
- End 1 Inside Diameter: 0.75 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 9016
- UPC: 072053062083
- Part Description: 2007 Cadillac XLR 90 Degree Hvac Heater Molded Hose
Vehicle Fitment- 2007 Cadillac XLR | All Trims | 8 Cyl 4.6L
$9.80
FAQ for Heater Hose Repair
Q: What should you do to prevent system contamination?
A:
You should cap or plug the cooling components to prevent system contamination.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heater pipe?
A:
The procedure is to remove the rear evaporator line assembly, remove the heater pipe assembly to the heater core retaining bolt, remove the heater pipe assembly from the vehicle and remove the sealing washers.
By Bob
GM Specialist
01/11/2022Q: What should you do before installation?
A:
You should lubricate the inside diameters of the hose with clean coolant before installation.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the heater inlet hose?
A:
First, drain the cooling system, remove the battery, disengage tension on the heater inlet hose clamp, disconnect the heater inlet hose from the heater pipe assembly and disconnect the heater inlet hose from the underhood junction box retainer clip. Next, disengage the tension on the heater inlet hose clamp, disconnect the heater inlet hose from the water pump and remove the heater inlet hose from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the heater pipe assembly retaining bolt?
A:
You can tighten the bolt to 14 N.m (10 lb-ft).
By Bob
GM Specialist
01/11/2022