< Back ×
My Vehicle Change Vehicle
2007 Cadillac XLR
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2007 Cadillac XLR Outlet Radiator Coolant Hose Assembly
PartNumber: 10346010
Product Specifications- Notes: Xlr; 4.6 Liter; 4.4 Liter
- Other Names: Lower Hose
- Item Dimensions: 17.2 x 6.8 x 3.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15146127
- Part Description: 2007 Cadillac XLR Outlet Radiator Coolant Hose Assembly
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Upper Radiator Hose Assembly
PartNumber: 15146129
Product Specifications- Notes: Xlr; 4.6l; 4.6 Liter
- Other Names: Upper Hose
- Item Dimensions: 32.7 x 6.5 x 5.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10441363
- Part Description: 2007 Cadillac XLR Upper Radiator Hose Assembly
Vehicle Fitment- 2007 Cadillac XLR | Base, Platinum | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac XLR Radiator Inlet Hose (Upper)
PartNumber: 19129885
Product Specifications- Notes: Xlr; 4.4l; 4.4 Liter
- Other Names: Upper Hose
- Item Dimensions: 33.1 x 6.5 x 5.8 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac XLR Radiator Inlet Hose (Upper)
Vehicle Fitment- 2007 Cadillac XLR | V | 8 Cyl 4.4 L GAS
FAQ for Coolant Hose Repair
Q: What is the removal procedure for the generator cooling hose assembly?
A:
The procedure is to remove the accessory drive belt tensioner, remove the generator cooling hose assembly to the generator bolt, remove the generator cooling hose assembly and remove the seal washers.
By Bob
GM Specialist
01/11/2022Q: How do you install the generator cooling pipe/hose quick connect fitting?
A:
You can install the generator cooling inlet pipe into the generator cooling inlet pipe fitting and give the cooler pipe a gentle pull.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the generator cooling pipe/hose quick connect fitting?
A:
The procedure is to install the J 41623-B onto the generator cooling inlet pipe, slide the J 41623-B toward the generator cooling inlet pipe fitting, connect the J 41623-B onto the generator cooling inlet pipe fitting, rotate the J 41623-B, pull back on the generator cooling inlet pipe and remove the J 41623-B.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the generator cooling hose assembly to the generator bolt?
A:
You can tighten the bolt to 27 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the generator cooling inlet hose fitting to the vehicle?
A:
You can tighten the fitting to 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the generator cooling inlet hose fitting?
A:
The procedure is to drain the cooling system, remove the accessory drive belt tensioner, disconnect the generator cooling hose, remove the generator cooling inlet hose fitting and remove the seal washer.
By Bob
GM Specialist
01/11/2022See more FAQs (1)