Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
Gaskets Included: Yes
Housing Color/Finish: Gray/Unfinished
Housing Material: Aluminum
Product Condition: Remanufactured
Throttle Body Actuation Type: Electric
Throttle Body Inlet Shape: Round
Throttle Body Outlet Shape: Round
Throttle Position Sensor Included: Yes
Part Description: 2007 Cadillac STS Remanufactured Throttle Body
More Info
Vehicle Fitment
2007 Cadillac STS | All Trims | 8 Cyl 4.4L
FAQ for Throttle Body Repair
Q: Are you recommended to use cleaners containing methyl ethyl ketone to clean the Throttle Body?
A:
Do not use a cleaner that contains methyl ethyl ketone.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque for the throttle body bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
02/11/2022
Q: Can you reuse the gasket in the installation of the Throttle Body Assembly?
A:
No, you should install a NEW gasket.
By Bob
GM Specialist
02/11/2022
Q: How should you properly deal with the Handling Idle Air Control (IAC) Valve?
A:
If the IAC valve has been in service: DO NOT push or pull on the IAC valve pintle. The force required to move the pintle may damage the threads on the worm drive. Also, DO NOT soak the IAC valve in any liquid cleaner or solvent, as damage may result.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How should you install the upper intake manifold bolts properly?
A:
You should tighten the Intake Manifold bolts in a circular pattern starting at the center (long bolts) and moving outward.
Q: What is the recommended torque for the air cleaner cover screws?
A:
The recommended torque is 8 N.m (71 lb in).
Q: How do you install the Air Tube?
A:
You need to install the air tubes, position the air tubes, install the fuel filler neck bolt, the right wheelhouse liner screw, the automatic level control (ALC) compressor, and connect the exhaust system, and the air tube.