FAQ for Control Arm Repair
Q: What is the recommended torque for the frame nut?
A:
The recommended torque is 135 N.m (100 lb-ft).
By BobGM Specialist
29/10/2022 Q: What should you know about the ball stud?
A:
The ball stud must not rotate during disassembly or reassembly. Hand tools must be used to keep the ball stud from rotating. If air tools are used and the stud is allowed to rotate, damage to the ball stud and/or stud mounting hole may occur.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the knuckle bolt?
A:
The recommended torque is 160 N.m (118 lb-ft).
By BobGM Specialist
29/10/2022 Q: What kind of special tools will be used when removing the Lower Control Arm (AWD)?
A:
J43631 Ball Joint Separator.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the frame nuts?
A:
The recommended torque is 120 N.m (89 lb-ft).
By BobGM Specialist
29/10/2022 Q: What kind of special tools will be used in the removal of the Upper Control Arm?
A:
J43631 Ball Joint Remover.
By BobGM Specialist
29/10/2022 See more FAQs (1)