Part Description: 2007 Cadillac STS Camshaft Position Sensor
Vehicle Fitment
2007 Cadillac STS | All Trims | 8 Cyl 4.6L
FAQ for Camshaft Position Sensor Repair
Q: What should you care about when turning the ignition off?
A:
Do not disconnect the power steering fluid lines/hoses from the reservoir.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the camshaft position (CMP) sensor?
A:
Remove the front compartment sight shields, disconnect the camshaft position (CMP) sensor electrical connector, and remove the CMP sensor bolt and the CMP sensor.
By Bob
GM Specialist
01/11/2022
Q: How do you install the CMP sensor?
A:
You need to install the CMP sensor, and the CMP sensor bolt, connect the CMP sensor electrical connector and install the front compartment sight shields.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the CMP sensor bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How should you deal with the electronic throttle control components?
A:
You need to handle the electronic throttle control components carefully. Use cleanliness to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.
Q: What is the recommended torque for the oil pressure sensor?
A:
The recommended torque is 20 N.m (15 lb-ft).
Q: Do you need to lift the vehicle in the removal of the Crankshaft Position Sensor?