< Back ×
My Vehicle Change Vehicle
2007 Cadillac STS
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2007 Cadillac STS Cylinder, Brake Master
PartNumber: 10367561
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 8.2 x 6.1 x 12.5 inches
- Item Weight: 2.20 Pounds
- Part Description: 2007 Cadillac STS Cylinder, Brake Master
Vehicle Fitment- 2007 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
Centric® Premium™ Brake Master Cylinder for 2007 Cadillac STS
PartNumber: 130.62138Product Specifications- UPC: 805890243731
- Part Description: 2007 Cadillac STS Premium™ Brake Master Cylinder
Vehicle Fitment- 2007 Cadillac STS | All Trims | All Engines
Cardone Reman® Remanufactured Master Cylinder for 2007 Cadillac STS
PartNumber: 10-3161Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617693455
- Part Description: 2007 Cadillac STS Remanufactured Master Cylinder
Vehicle Fitment- 2007 Cadillac STS | All Trims | All Engines
OEM (Genuine) 2007 Cadillac STS Cylinder Asm, Brake Master
PartNumber: 19209197
Product Specifications- Notes: Sts, Sts-V; W/Active Steering
- Other Names: Master Cylinder
- Item Dimensions: 9.2 x 9.1 x 8.4 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15267509
- Part Description: 2007 Cadillac STS Cylinder Asm, Brake Master
Vehicle Fitment- 2007 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Brake Master Cylinder Repair
Q: How should you properly remove the brake fluid level sensor?
A:
You can use needle nose pliers carefully depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove it.
By Bob
GM Specialist
01/11/2022Q: How do you install the Master Cylinder Reservoir?
A:
You need to clean the reservoir, dry the reservoir, lubricate the new seals and the reservoir bayonets. install the seals and the reservoir, tap in the reservoir retaining pins, fill the master cylinder reservoir, install the brake fluid level sensor, and the master cylinder.
By Bob
GM Specialist
01/11/2022Q: Can you use abrasives to clean the brake master cylinder bore?
A:
No, do not use abrasives to clean the brake master cylinder bore.
By Bob
GM Specialist
01/11/2022Q: What do you need to consider in the removal of the Master Cylinder?
A:
Remember to install a rubber cap or plug to the exposed brake pipe fitting end to prevent brake fluid loss and contamination.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake master cylinder mounting nuts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Master Cylinder Reservoir?
A:
Remove the master cylinder, and the fluid level sensor, drain the brake fluid, tap out the reservoir retaining pins, and remove the reservoir and the seals.
By Bob
GM Specialist
01/11/2022Q: What is required when adding liquid to the brake master cylinder reservoir?
A:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022See more FAQs (2)