2007 Cadillac Escalade ESV Rain Sensors

You need to wear latex rubber gloves, hold the moisture sensor in the left or right hand, release the 3 clips securing the lens to the sensor and be careful when disengaging the sensor and the lens cover, keep the sensor electronics free from any dirt, debris or foreign material while open and discard the old moisture sensor lens.

You need to disengage the retaining clips from the mounting bracket on the windshield and the rain sensor lens from the module and clean the windshield where the old conductive jell residue is present.

You need to remove the old conductive jell residue from the windshield mounting bracket, align and secure the two sensor halves back as one unit, remove the plastic protective covering from the lens, position and install the moisture sensor back onto the windshield bracket, connect the electrical cover and secure the rain sensor module trim cover.