FAQ for Hvac Heater Blend Door Actuator Repair
Q: What is the recommended torque for recirculation actuator retaining screws?
A:
The recommended torque is 1.6 N.m (14 lb in).
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Auxiliary Mode Actuator (BEHR)?
A:
You need to remove the right rear quarter trim panel, reposition the auxiliary HVAC module inward to gain access to the mix door actuator, and disconnect the electrical connector from the mix door actuator.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the air temperature actuator (right side)?
A:
You need to remove the instrument panel center trim panel and disconnect the electrical connector from the air temp actuator-left.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Auxiliary Air Temperature Actuator (DELPHI)?
A:
You need to remove the right rear quarter trim panel and disconnect the electrical connector from the temp door actuator.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the air temperature actuator (left side)?
A:
You need to remove the instrument panel insulator and disconnect the electrical connector from the right air temp actuator.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Mode Actuator Screw-Auxiliary?
A:
The recommended torque is 2.5 N.m (16 Ib in).
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Auxiliary Mode Actuator (Delphi)?
A:
You need to remove the right rear quarter trim panel and disconnect the electrical connector from the mode actuator.
By BobGM Specialist
01/11/2022 Q: How do you install the recirculation actuator?
A:
You need to install the recirculation actuator and the recirculation actuator retaining screws, connect the electrical connector to the recirculation actuator, install the air distribution duct, and then re-calibrate the recirculation actuator.
By BobGM Specialist
01/11/2022 Q: How many screws does the mode actuator have?
A:
It has 2 screws.
By BobGM Specialist
01/11/2022 Q: How many screws does the air temperature actuator have?
A:
It has 2 screws.
By BobGM Specialist
01/11/2022 See more FAQs (13)