< Back ×
My Vehicle Change Vehicle
2007 Cadillac Escalade ESV
< Back to View All
Exhaust Manifolds, Pipes & Mufflers
- Department
- Prices
OEM (Genuine) 2007 Cadillac Escalade ESV Converter & Pipe
PartNumber: 19418932
Product Specifications- Notes: Escalade Esv; W/O Federal Tier 2; California Bin 4
- Other Names: Catalytic Converter, Converter & Pipe
- Item Dimensions: 41.6 x 35.0 x 15.5 inches
- Item Weight: 35.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25824121
- Part Description: Converter & Pipe
$2255.32 MSRP:$3389.03You Save: $1133.71 (34%)
OEM (Genuine) 2007 Cadillac Escalade ESV Converter & Pipe
PartNumber: 19418958
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, Federal, 6.2 Liter
- Other Names: Catalytic Converter, Converter & Pipe
- Fitment Type: Direct Replacement
- Replaces: 25904626, 20854457, 25904629
- Part Description: Converter & Pipe
$2145.06 MSRP:$3416.66You Save: $1271.60 (38%)
OEM (Genuine) 2007 Cadillac Escalade ESV Muffler & Pipe
PartNumber: 20757530
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, 6.2 Liter
- Other Names: Muffler, Muffler & Pipe
- Item Dimensions: 132.9 x 25.8 x 15.1 inches
- Item Weight: 243.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: Muffler & Pipe
OEM (Genuine) 2007 Cadillac Escalade ESV Converter & Pipe
PartNumber: 19420110
Product Specifications- Notes: 1/2 Ton, W/O Dual Tailpipe, California, 6.2 Liter
- Other Names: Converter & Pipe
- Replaces: 25824122, 25904627, 20854458
- Part Description: Converter & Pipe
FAQ for Exhaust Pipe Repair
Q: What is the recommended torque for the exhaust manifold nuts?
A:
The recommended torque is 50 N.m (37 Ib ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the oil pan skid plate?
A:
The recommended torque is 28 N.m (21 Ib ft).
By Bob
GM Specialist
01/11/2022Q: How do you remove the exhaust seal (1500 series)?
A:
You need to remove the right front connector position assurance (CPA) retainer, disconnect the right front heated oxygen sensor (HO2S) electrical connector from the engine wiring harness electrical connector, remove the right rear CPA retainer, disconnect the engine wiring harness electrical connector from the right rear HO2S electrical connector and remove the right rear HO2S electrical connector clip from the engine harness clip and the left rear CPA retainer. Next, you can disconnect the left rear HO2S electrical connector from the engine wiring harness electrical connector, remove the left front CPA retainer, disconnect the engine wiring harness electrical connector from the left front HO2S, remove the left front HO2S electrical connector clip from the fuel line clip, the left front CPA retainer and the engine wiring harness electrical connector clip from the fuel line clip. Then you can disconnect the engine wiring harness electrical connector from the left front HO2S, remove the HO2S and the catalytic converter to exhaust manifold nuts, separate the catalytic converter assembly from the exhaust manifolds and remove the exhaust seal as required.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the exhaust seal (2500 series)?
A:
You need to loosen the 2 rear oil pan skid plate bolts, remove the 2 front oil pad skid plate bolts and skid plate, the right front connector position assurance (CPA) retainer, and disconnect the right front heated oxygen sensor (HO2S) electrical connector from the engine wiring harness electrical connector. Next, you can remove the right rear CPA retainer, disconnect the engine wiring harness electrical connector from the right rear HO2S electrical connector, and remove the right rear HO2S electrical connector clip from the engine harness clip and the left rear CPA retainer. Then you can disconnect the left rear HO2S electrical connector from the engine wiring harness electrical connector, remove the left front CPA retainer and the left front HO2S electrical connector from the engine wiring harness electrical connector, the exhaust pipe hanger bracket bolts and the catalytic converter to exhaust manifold nuts, separate the catalytic converter assemblies from the exhaust manifolds and remove the exhaust seal(s) as required.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the exhaust muffler insulator, hanger, and bracket (2500)?
A:
The proper way is to spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger will be inserted, and install the exhaust system insulator to the frame hanger, as required. If the exhaust system insulator was replaced, install the exhaust muffler assembly. Then you can spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted, install the exhaust system insulator, as required, and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: How do you remove the exhaust hanger mounting bracket?
A:
You need to remove the left and right catalytic converters and the exhaust pipe hanger bracket bolts and hanger.
By Bob
GM Specialist
29/10/2022Q: How do you install the Exhaust Muffler Insulator, Hanger, and Bracket (1500-w/RPO L92)?
A:
You need to spray lubricant onto the exhaust system insulator hole where the frame hanger will be inserted and install the exhaust system insulator to the frame hanger. If the exhaust system insulator was replaced, install the exhaust muffler assembly. Then you can spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger will be inserted, install the exhaust system insulator and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: How do you install the exhaust hanger mounting bracket?
A:
You need to position the exhaust pipe hanger bracket to the transmission and install the exhaust pipe hanger bracket bolts and the left and right catalytic converters.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the exhaust muffler insulator, hanger, and bracket (2500)?
A:
You need to spray lubricant if necessary, onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted, and remove the exhaust system insulator, as required. If replacing the exhaust system insulator, remove the exhaust muffler assembly. Then you can spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger is inserted, and remove the exhaust system insulator from the frame hanger, as required.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Exhaust Muffler Insulator, Hanger, and Bracket (1500-w/RPO L92)?
A:
You need to spray lubricant onto the exhaust system insulator holes where the frame hanger and the exhaust hanger are inserted and remove the exhaust system insulator. If replacing the exhaust system insulator, remove the exhaust muffler assembly. Then you can spray lubricant if necessary, onto the exhaust system insulator hole where the frame hanger is inserted and remove the exhaust system insulator from the frame hanger.
By Bob
GM Specialist
29/10/2022See more FAQs (5)