2007 Cadillac Escalade ESV Engine Mount

You can position the engine mount to the engine, install the engine mount to engine bolts and use the adjustable jack and lower the engine until the engine mount is sitting flush on the frame. Then you can remove the adjustable jack from the engine block, and install the left wheelhouse liner, the engine mount to frame bolts, and the generator bracket. If the vehicle is equipped with 4WD, install the front drive axle. Install the air cleaner outlet duct.

You need to position the engine mount to the engine, install the engine mount to engine bolts, and lower the engine until the engine mount is sitting flush on the frame. Next, you can remove the adjustable jack from the engine block, and install the engine mount to frame bolts and the A/C compressor bracket. If the vehicle is equipped with 4WD, install the front drive axle bracket and bolts. If the vehicle is equipped with 4WD, install the front drive axle, and then install the exhaust manifold.

You need to remove the air cleaner outlet duct. If the vehicle is equipped with four-wheel drive (4WD), remove the front drive axle. Next, you can remove the generator bracket, the engine mounts to frame bolts, and the left wheelhouse liner, place an adjustable (screw type) jack to the tab located on the engine block, and remove the engine mount to engine bolts. Then you can use the adjustable jack and raise the engine slightly until there is enough clearance to remove the engine mount and remove the engine mount.

You need to remove the air cleaner outlet duct. If the vehicle is equipped with four-wheel drive (4WD), remove the front drive axle. If the vehicle is equipped with 4WD, remove the front drive axle bracket bolts and bracket. Then you can remove the exhaust manifold, the air conditioning (A/C) compressor bracket and the engine mount to frame bolts, place an adjustable (screw type) jack to the tab located on the engine block and remove the engine mount to engine bolts. Then you can use the adjustable jack and raise the engine slightly until there is enough clearance to remove the engine mount and remove the engine mount.