Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: Engine Coolant Temperature Sensor
More Info
FAQ for Coolant Temperature Sensors Repair
Q: What is the proper way to install the engine coolant temperature sensor?
A:
If installing the old sensor, coat the threads with sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent, install the ECT sensor, connect the engine wiring harness electrical connector to the ECT sensor and refill the cooling.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the engine coolant temperature sensor?
A:
You need to drain the cooling system to a level below the engine cooling temperature (ECT) sensor, disconnect the engine wiring harness electrical connector from the ECT sensor, and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should you do before replacing the radiator grille reinforcement support?
A:
You need to remove the upper Radiator air baffle and deflector, the headlamp assemblies, and the upper fascia bolts as needed to allow room to clear the radiator grille reinforcement when removing the hood latch.
Q: How do you remove the thermostat?
A:
You need to remove the Thermostat housing and the thermostat.
Q: What is the removal procedure for the engine coolant fan motor?
A:
You need to remove the cooling blade(s), the Cooling Fan Motor bolts, and the cooling fan motor(s).