2007 Cadillac Escalade ESV A/C Condenser

You need to install the condenser to the vehicle and the upper insulator retainers and the insulator retainer bolts, connect the evaporator tube to the condenser using new sealing washers and install the evaporator tube nut to the condenser. Then you can connect the compressor discharge hose to the condenser using new sealing washers, install the compressor discharge hose nut to the condenser, the lower bolts to the hood latch support bracket and the tie bar to radiator brace bolts, access the bolts from the rear of the upper radiator support and evacuate and recharge the system and then leak test the fittings of the component using the J 39400-A.

You need to recover the refrigerant, remove the upper tie bar and the compressor discharge hose assembly bolt from the condenser, disconnect the compressor discharge hose assembly from the condenser and remove the evaporator tube nut from the condenser. Then you can disconnect the evaporator tube from the condenser, and remove the insulator retainer bolts and the upper insulator retainers, and the condenser from the vehicle.