< Back ×
My Vehicle Change Vehicle
2007 Cadillac DTS
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2007 Cadillac DTS Seat Cushion Heater
PartNumber: 15216397
Product Specifications- Notes: W/O Lumbar; W/Lumbar
- Location: Passenger Side
- Other Names: Seat Cushion Heater
- Item Dimensions: 14.9 x 9.6 x 0.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac DTS Seat Cushion Heater
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac DTS Seat Back Heater
PartNumber: 15216398
Product Specifications- Notes: W/O Lumbar; W/Lumbar
- Location: Passenger Side
- Other Names: Seat Back Heater
- Item Dimensions: 16.5 x 10.0 x 1.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac DTS Seat Back Heater
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac DTS Heater Asm-Rear Seat Back Cushion
PartNumber: 15216400Product Specifications- Notes: W/O Lumbar; W/Lumbar
- Location: Driver Side
- Other Names: Seat Back Heater
- Item Dimensions: 18.9 x 9.7 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac DTS Heater Asm-Rear Seat Back Cushion
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Cadillac DTS Seat Cushion Heater
PartNumber: 15216399
Product Specifications- Notes: W/O Lumbar; W/Lumbar
- Location: Driver Side
- Other Names: Seat Cushion Heater
- Item Dimensions: 14.7 x 9.9 x 0.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac DTS Seat Cushion Heater
Vehicle Fitment- 2007 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Seat Heater Pad Repair
Q: What should be done before replacing the Rear Seat Cushion Heater?
A:
You should remove the rear seat cushion.
By Bob
GM Specialist
01/11/2022Q: How many heater assemblies does the rear seat back cushion have?
A:
The rear seat back cushion has 2 heater assemblies.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for Circuit/System testing?
A:
The procedure is to disconnect the harness connector at the heated seat switch, connect the harness connector to the heated seat switch, disconnect the appropriate harness connector at the rear heated seat module, and then replace the heated seat module if all circuits test normal.
By Bob
GM Specialist
01/11/2022Q: How many heater assemblies does the rear seat cushion have?
A:
The rear seat cushion has 2 assemblies.
By Bob
GM Specialist
01/11/2022Q: What should be done before using this diagnostic procedure?
A:
You should perform the Diagnostic System Check-Vehicle before using this diagnostic procedure.
By Bob
GM Specialist
01/11/2022Q: How to test the passenger Seat HVC mode?
A:
The scan tool displays Off/Back and Cushion/Back Only/Cool. When any one of these heated or cool seat switches is pressed, the scan tool will display the switch input to the door module.
By Bob
GM Specialist
01/11/2022Q: What should be done before using the symptom tables?
A:
Perform the Diagnostic System Check-Vehicle before using the symptom tables and familiarize yourself with the system functions.
By Bob
GM Specialist
01/11/2022Q: How to test the driver Seat HVC mode?
A:
The scan tool displays Off/Back and Cushion/Back Only/Cool. When any one of these heated or cool seat switches is pressed, the scan tool will display the switch input to the door module.
By Bob
GM Specialist
01/11/2022Q: What should be noticed about the diagnostic aids?
A:
The ignition must be cycled OFF and then ON between each test to reset the CCS module to perform valid tests when diagnosing the climate control seat (CCS) system.
By Bob
GM Specialist
01/11/2022Q: What is the procedure for the Circuit/System testing?
A:
The procedure is to disconnect the harness connector at the appropriate seat cushion or seat back ventilation heat and cool module, press the HEAT switch, and then replace the CCS module if all circuits test is normal.
By Bob
GM Specialist
01/11/2022See more FAQs (11)