Part Description: 2007 Cadillac DTS Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Cadillac DTS | All Trims | All Engines
FAQ for Coolant Temperature Sensors Repair
Q: What is the proper way to install the Engine Coolant Temperature Sensor?
A:
The proper way is to install the ECT sensor, connect the engine harness electrical connector, fill the cooling system, and then install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Engine Coolant Temperature Sensor?
A:
The procedure is to remove the fuel injector sight shield, drain the cooling system, disconnect the engine harness electrical connector, and then remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the Radiator Cap Removal Caution?
A:
To avoid being burned, do not remove the Radiator Cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam under pressure if the radiator cap or surge tank cap is removed while the engine and radiator are still hot.
Q: What is the removal procedure for the Water Pump?
A:
The procedure is to remove the Water Pump housing, the water pump cover bolt/studs, the water pump cover, the water pump bolts, and the water pump and discard the water pump O-ring seal.
Q: What is the proper way to install the Electric Cooling Fan Motor?
A:
The proper way is to install the Cooling Fan Motor, the cooling fan motor retaining bolts, the cooling fan, and the cooling fan assembly.