Part Description: 2007 Cadillac CTS Canister, Evap Emission
More Info
Vehicle Fitment
2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Vapor Canister Purge Solenoid Repair
Q: What is the removal procedure for replacing the Evaporative Emission Canister Purge Solenoid Valve?
A:
Disconnect the purge line from the purge valve solenoid, the solenoid electrical connector, and the purge line from the manifold side of the solenoid, and then remove the solenoid.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to the Evaporative Emission Canister Purge Solenoid Valve?
A:
Install the purge valve solenoid, disconnect the purge line from the manifold side of the solenoid and the solenoid electrical connector and connect the purge line to the solenoid.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for replacing the Evaporative Emission Canister Vent Solenoid Valve?
A:
Remove the evaporative emission (EVAP) canister, Clean the EVAP canister vent valve and twist the canister vent valve counterclockwise, and finally pull the canister vent valve from the EVAP canister.
Q: What should be removed to get access to the Evaporative Emission Canister Filter?
A:
Remove the evaporative emission (EVAP) canister filter cover.