< Back ×
My Vehicle Change Vehicle
2007 Cadillac CTS
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Throttle Body for 2007 Cadillac CTS
PartNumber: 67-3016Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: No Gasket Required
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2007 Cadillac CTS Remanufactured Throttle Body
Vehicle Fitment- 2007 Cadillac CTS | All Trims | 6 Cyl 3.6L
- 2007 Cadillac CTS | All Trims | 6 Cyl 2.8L
$100.90
OEM (Genuine) 2007 Cadillac CTS Throttle Body
PartNumber: 12589056
Product Specifications- Notes: Cts; 3.6l; 2nd Design
- Other Names: Throttle Body
- Item Dimensions: 8.6 x 5.4 x 4.5 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac CTS Throttle Body
Vehicle Fitment- 2007 Cadillac CTS | Base | 6 Cyl 3.6 L GAS
$287.43 MSRP:$542.34You Save: $254.91 (48%)OEM (Genuine) 2007 Cadillac CTS Throttle Body
PartNumber: 19420034
Product Specifications- Notes: Cts; 6.0l
- Other Names: Throttle Body
- Item Dimensions: 11.8 x 7.7 x 6.1 inches
- Item Weight: 3.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12570790
- Part Description: 2007 Cadillac CTS Throttle Body
Vehicle Fitment- 2007 Cadillac CTS | V | 8 Cyl 6.0 L GAS
OEM (Genuine) 2007 Cadillac CTS Throttle Body
PartNumber: 12592916
Product Specifications- Notes: Cts; 2.8l
- Other Names: Throttle Body
- Item Dimensions: 8.2 x 5.3 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Cadillac CTS Throttle Body
Vehicle Fitment- 2007 Cadillac CTS | Base | 6 Cyl 2.8 L GAS
FAQ for Throttle Body Repair
Q: What should be noticed while servicing the Throttle Body?
A:
Do not subject a throttle body assembly that contains the throttle position sensor, idle air control valve, and sealed throttle shaft bearings to an immersion cleaner or a strong solvent.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the Throttle Body Assembly?
A:
Remove the air cleaner intake duct, the throttle body electrical connector, and the throttle body and gasket.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the Throttle Body Assembly?
A:
Install the throttle body, NEW gasket, the wiring harness conduit, the throttle body electrical connector, and the air cleaner intake duct.
By Bob
GM Specialist
02/11/2022Q: What should be noticed before servicing the Handling Idle Air Control Valve?
A:
If the IAC valve has been in service: DO NOT push or pull on the IAC valve pintle. DO NOT soak the IAC valve in any liquid cleaner or solvent.
By Bob
GM Specialist
01/11/2022