FAQ for Oxygen Sensor Repair
Q: What should be noticed while servicing the Oxygen Sensor?
A:
Handle the oxygen sensors carefully to prevent damage to the component. Keep the electrical connector and the exhaust inlet end free of contaminants. Do not use cleaning solvents on the sensor. And do not drop or mishandle the sensor.
By BobGM Specialist
02/11/2022 Q: What is the proper way to install the Heated Oxygen Sensor-Bank 1 Sensor 2?
A:
Install the HO2S, connect the HO2S electrical connector, and install the HO2S wiring harness to the transmission case.
By BobGM Specialist
02/11/2022 Q: What should be noticed when installing the Heated Oxygen Sensor Repl-Bank1 Sensor2?
A:
If you are installing the original sensor, apply anti-seize compound GM P/N 5613695 or equivalent to the sensor threads.
By BobGM Specialist
02/11/2022 Q: What should be noticed while servicing the Heated Oxygen and Oxygen Sensor?
A:
Do not remove the pigtail from either the heated oxygen sensor (HO2S) or the oxygen sensor (O2S). Removing the pigtail or the connector will affect sensor operation.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Heated Oxygen Sensor-Bank 2 Sensor 1?
A:
Remove the HO2S electrical connector and the HO2S.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Heated Oxygen Sensor-Bank 2 Sensor 2?
A:
Remove the heated oxygen sensor (HO2S) electrical connector and the HO2S.
By BobGM Specialist
02/11/2022 Q: What should be noticed while servicing the Excessive Force and Oxygen Sensor?
A:
The oxygen sensor may be difficult to remove when the engine temperature is below 48°C (120°F). Excessive force may damage threads in the exhaust manifold or the exhaust pipe.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Heated Oxygen Sensor-Bank 1 Sensor 2?
A:
Disconnect the heated oxygen sensor (HO2S) electrical connector, and remove the HO2S.
By BobGM Specialist
02/11/2022 Q: What is the proper way to install the Heated Oxygen Sensor-Bank 2 Sensor 1?
A:
Install the HO2S and the HO2S electrical connector.
By BobGM Specialist
02/11/2022 Q: What is the proper way to install the Heated Oxygen Sensor-Bank 2 Sensor 2?
A:
Install the HO2S, the HO2S electrical connector, and the HO2S wiring harness.
By BobGM Specialist
02/11/2022 See more FAQs (8)