Part Description: 2007 Cadillac CTS Fuel Tank Pressure Sensor
Vehicle Fitment
2007 Cadillac CTS | All Trims | 6 Cyl 3.6L
2007 Cadillac CTS | All Trims | 6 Cyl 2.8L
$27.27
FAQ for Fuel Tank Pressure Sensor Repair
Q: What is the removal procedure for the Fuel Tank Pressure Sensor?
A:
Raise and support the vehicle, disconnect the fuel tank pressure sensor electrical connector, and remove the fuel tank pressure sensor.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Fuel Tank Pressure Sensor?
A:
Install the fuel tank pressure sensor and connect the fuel tank pressure sensor electrical connector.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Primary Fuel Level Sensor Replacement?
A:
Install the Fuel Level Sensor by aligning the tabs of the sensor with the slots and sliding the sensor fully into position, and the primary fuel tank module.
Q: What is the proper way to install the Filler Tube?
A:
Connect the filler hose and the filler vent tube, and install the rear bumper fascia, the right rear wheel, and the fuel filler cap.
Q: What should be noticed while removing the fuel rail assembly
A:
Remove it carefully to prevent damage to the injector electrical connector terminals and the injector spray tips. Support the fuel rail after the fuel rail is removed to avoid damaging the fuel rail components.