Part Description: 2007 Cadillac CTS Pipe Asm-Fuel Tank Filler
More Info
Vehicle Fitment
2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
FAQ for Fuel Filler Hose Repair
Q: What is the proper way to install the Filler Tube?
A:
Connect the filler hose and the filler vent tube, and install the rear bumper fascia, the right rear wheel, and the fuel filler cap.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Filler Tube?
A:
Remove the fuel filler cap, the right rear wheel, the rear bumper fascia, and the fuel filler tube.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Primary Fuel Level Sensor Replacement?
A:
Remove the primary fuel tank module and the Fuel Level Sensor by pulling the locking tab away from the sensor and sliding the sensor away from the module assembly.
Q: What is the removal procedure for the Fuel Tank Pressure Sensor?
A:
Raise and support the vehicle, disconnect the Fuel Tank Pressure Sensor electrical connector, and remove the fuel tank pressure sensor.
Q: What should be noticed while removing the fuel rail assembly
A:
Remove it carefully to prevent damage to the injector electrical connector terminals and the injector spray tips. Support the fuel rail after the fuel rail is removed to avoid damaging the fuel rail components.