Part Description: 2007 Cadillac CTS Weatherstrip Asm-Rear Side Door Window Inner
More Info
Vehicle Fitment
2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Seal Repair
Q: What is the proper way to install
A:
Install the weatherstrip on the door opening flange, the weatherstrip along the roof rail and the window-pillar flange, and the carpet retainer.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Weatherstrip?
A:
Remove the carpet retainer, start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange, work around the door opening and remove the weatherstrip.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Front Side Door Bottom Auxiliary Sealing?
A:
Remove the front door bottom sealing strip retainers and the sealing strip.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Rear Side Door Bottom Auxiliary Sealing Strip?
A:
Remove the rear door bottom sealing strip retainers and the sealing strip.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Front Side Door Bottom Auxiliary Sealing?
A:
Install the front door bottom sealing strip, and secure the sealing strip.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Rear Door Upper Auxiliary Weatherstrip?
A:
The way is to install the rear door upper auxiliary weatherstrip and the rear door stationary window/division channel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Rear Door Upper Auxiliary Weatherstrip?
A:
The procedure is to lower the window to the full down position and remove the rear door stationary window/division channel and the upper auxiliary weatherstrip.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Rear Door Opening Weatherstrip?
A:
The procedure is to remove the carpet retainer and the weatherstrip.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Rear Side Door Bottom Auxiliary Sealing Strip?
A:
Install the rear door bottom sealing strip and the retainers.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed while installing the Rear Door Opening Weatherstrip?
A:
The rubber side of the weatherstrip should be outboard of the car.
By Bob
GM Specialist
01/11/2022
See more FAQs (5)
FAQ for Other Repair Info
Q: What is the proper way to install the Power Door Lock Switch?
A:
The way is to snap the Door Lock Switch into the door switch bezel, connect the electrical connector, and snap the bezel into position.
Q: Under what conditions do we ensure that we have the proper alignment of the hood to the body before we tighten the hood latch mounting fasteners?
A:
After removing the Hood Latch assembly, after loosening the mounting bolts, and after changing the hood adjustment.
Q: What is the proper way to install the Hood Latch Release Cable?
A:
Seat the Hood Release Cable grommet into the wheel opening, and install the hood release cable and the hood latch.